DIY I2C Interface EEPROM Memory Module with AT24C02 Chip / LED Indicator – Blue

DIY I2C Interface EEPROM Memory Module with AT24C02 Chip / LED Indicator – Blue

$16.00
Product Code: 5107494
Stock In Stock
Viewed 517 times

Product Description

Product Description

1.Onboard 8P chip socket for mounting on AT24C02 chip
2. Pin header power supply, onboard power indicator
3. Onboard the I2C communications required pull-up resistor
4. All pin leads and labeling can direct address input and write-protect pin jumper settings
5. AT24C02 is a 2K bit serial CMOS EEPROM, including 256 8-bit bytes, with 8-byte page write buffer
6. Operating through IIC bus interface, with special write protect function
7. AT24C02 supports IIC, bus data transmission protocol, which regulates that any devices that transmit data to bus can be transmitter and any devices that receive data from bus can be receiver
8. Both the main components and subordinative device can be used as a transmitter or receiver
9. Connection between module and controller: connect VCC of EEPROM module to a power supply. GND to ground, SCL and SDA to I/O port respectively
10. Module short circuit instruction: A0, A1, A2 are addressed to expand memory for multiple modules WP is written protection port when WP is connected to GND, it is invalid, and when connected to VCC, it is effective
11. Power supply voltage input: 3 – 6V DC, with LED indicator, and the light will be on when power on

Specification:
General
Size 5.5*1.4*1.2cm
Weight 10g
Package Weight
One Package Weight 0.03kgs / 0.07lb
Qty per Carton 150
Carton Weight 4.50kgs / 9.92lb
Carton Size 32cm * 30cm * 24cm / 12.6inch * 11.81inch * 9.45inch




Write a review

Note: HTML is not translated!
    Bad           Good

When you order from trendsuch.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

The total time it takes to receive your order is shown below:

The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

Shipping from your local warehouse is significantly faster. Some charges may apply.

In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!

Back to top